Lucite "June" Brushed Brass Drawer Pulls and Knobs

$11⁹⁹

Taxes and shipping calculated at checkout.

Size

T-Knob Long T-Knob 3-3/4" Drawer Pull 5" Drawer Pull 6-5/16" Drawer Pull 7-9/16" Drawer Pull 8-13/16" Drawer Pull 10-1/16" Drawer Pull 12-5/8" Drawer Pull

The June Lucite Cabinet Hardware pairs clear cylindrical pulls and T-bar knobs with warm brushed brass accents for a light, architectural look. Transparent Lucite bars allow the cabinetry beneath to remain visible, while squared brass posts, slim collars, and clear projecting ends give each piece a distinctive jewelry-like profile. The combination makes these Lucite drawer pulls and cabinet knobs especially striking on painted, natural wood, and high-contrast cabinetry.

Offered in coordinating knob and pull sizes, the June collection can carry the same clear acrylic and brass cabinet hardware across drawers, cabinet doors, vanities, built-ins, and furniture. Its clean proportions suit contemporary, transitional, and glam interiors without feeling overly decorative. Pair the longer Lucite cabinet pulls with wide drawers and use the compact T-bar knobs on upper cabinets for a cohesive kitchen or bathroom installation.

Dimensions
T-Knob
Length: 2"
Projection: 1-5/16"

Long T-Knob
Length 3-1/8"
Projection: 1-5/16"

3-3/4" Drawer Pull
Mounting Holes/Centers: 3-3/4" (96mm)
Overall Length: 4-3/4"
Projection: 1-5/16"

5" Drawer Pull
Mounting Holes/Centers: 5" (128mm)
Overall Length: 6"
Projection: 1-5/16"

6-5/16" Drawer Pull
Mounting Holes/Centers: 6-5/16" (160mm)
Overall Length: 7-1/16"
Projection: 1-5/16"

7-9/16" Drawer Pull
Mounting Holes/Centers: 7-9/16" (192mm)
Overall Length: 8-9/16"
Projection: 1-5/16"

8-13/16" Drawer Pull
Mounting Holes/Centers: 8-13/16" (224mm)
Overall Length: 9-13/16"
Projection: 1-5/16"

10-1/16" Drawer Pull
Mounting Holes/Centers: 10-1/16" (256mm)
Overall Length: 11-13/16"
Projection: 1-5/16"

12-5/8" Drawer Pull
Mounting Holes/Centers: 12-5/8" (320mm)
Overall Length: 13-5/8"
Projection: 1-5/16"

These items come with screws.

How to measure cabinet hardware?

To measure cabinet hardware like handles or pulls, you mainly need to know the center-to-center (C-C) measurement—the distance between the centers of the two screw holes. Here’s a quick guide:

For Pulls (Handles):
Measure from the center of one screw hole to the center of the other. This is usually given in millimeters or inches (e.g., 96 mm or 3-3/4").

Tip: Don’t measure the total length unless specified—it’s not the same as the center-to-center distance.

For Knobs:
No measuring is needed for hole spacing—just check the knob’s diameter and projection (how far it sticks out from the cabinet).